 | Safety Advice | In-Season Liner Care | Off-Season Liner Care |
Making Your Investment Last (Off-Season)
There are some simple steps you can take when your pool is not in use to ensure that your Vyn-All®liner lasts.
- Have your pool professional close the pool down or have them supply you with instructions so that you can do the job yourself.
- Make sure you follow all instructions carefully so that you protect your pool and liner properly.
- Clean and vacuum your pool thoroughly.
- Clean out the skimmers and remove all leaves or other debris.
- Test the water chemistry and balance it by adding what is required to bring your pool water into normal range.
- Leave your filter and pump running for several hours thereafter in order to circulate and fully dilute and dissolve all the chemicals completely.
WARNING!
Chlorine
may settle in the deep end of the pool and bleach the liner if it is
not completely dissolved. Chemicals in floating devices can cause the
liner to discolor or fade in areas below it.
After all the chemicals are fully dissolved, remove all floating chemical dispensers then lower the level of the water in the pool to the level recommended by your pool professional.
Follow Your Pool Professional's Instructions
The instructions you receive from your pool professional should include:
- Blowing all the water out of lines
- Plugging all lines
- Disconnecting, drainage and proper storage of the filter and pump
- Plugging and preparing the skimmers
- Safe storage of leftover chemicals
Make sure you follow all instructions carefully so that you protect your pool and liner properly.
Install proper-fitting cover
Install
a proper fitting winter pool cover that covers the main body of the
pool as well as any stairs, swimouts or benches. Seal the cover tightly
around the perimeter of the pool. A good cover that fits properly and
is secured in place will make it much easier and quicker for you to get
your pool in shape for next years pool season.
 |
PLEASE SELECT |
 |
 | ||
